The UltraAV 4x2 HDMI Matrix and Distribution Amplifier accepts signals from up to 4 HDMI enabled audio/video sources and distributes the signals to up to 2 HDMI enabled displays. The matrix can be configured to send any input to any output, supporting all HDMI displays, monitors, projectors and TV's. Control the UltraAV Matrix using the included remote control or with the manual push-buttons.
The UltraAV 4x2 HDMI Matrix features a built-in signal amplifier. The signal amplifier supports long length HDMI High Speed cables of up to 65' (20m) to/from the input/output. The 4x2 HDMI Matrix supports full HD 1080p video and audio and is perfect for use in residential and light commercial installations. Use the audio from the source on input 1 to output digital audio or analog audio to your stereo receiver or other audio device using the built-in audio outputs
The UltraAV 4x2 matrix features a solid metal housing that provides an effective barrier against the unpredictable, harmful effects of Radio Frequency (RF) and Electromagnetic Interference (EMI). The housing includes integrated mounting tabs enabling the splitter to be easily mounted.
The circuit board is equipped with both over-current and over-voltage protection and will automatically power down if encountered protecting your matrix switch. The circuit board will restore automatically once the excessive current or voltage has passed.
The 4x2 HDMI Matrix includes 4 infrared (IR) ports, each accepting an optional infrared transmitter (IR-TX) for controlling a source device using a remote control. When used with an optional IR adapter and an IR receiver (IR-RX), the source device can be managed by a remote control from the location of the display, far away from the source device. The IR adapter is plugged into the display side of the HDMI cable and the IR-RX is plugged into the 3.5mm port on the IR adapter. When the IR-RX receives a control signal from the remote control, it passes the signal through IR adapter, through the HDMI cable and into the 4x2 matrix. From there, the 4x2 matrix routes the signal through the IR-TX, where the IR-TX "flashes" the signal to the IR receiver of the source device, delivering the command sent by the remote control.
The below accessories can be purchased separately.
WARNING: This product may expose chemical such as Bisphenol A (BPA) that is known to the State of California to cause cancer or reproductive harm. For more information, please go to www.p65warnings.ca.gov