The UltraAV HDMI Splitter and Distribution Amplifier accepts a signal from an HDMI enabled audio/video source and distributes the signal to up to 8 HDMI displays, monitors, projectors or TV's. The UltraAV Splitter features a built-in signal amplifier. The signal amplifier supports long length HDMI High Speed cables of up to 65' (20m) to/from the input/output.
The UltraAV 1x8 HDMI Splitter and Distribution Amplifier accepts a signal from an HDMI enabled audio/video source and distributes the signal to up to 8 HDMI displays. The 1x8 splitter uses a solid metal housing that provides an effective barrier against the unpredictable, harmful effects of Radio Frequency (RF) and Electromagnetic Interference (EMI). The housing includes integrated mounting tabs enabling the splitter to be easily mounted. Featuring a Silicon Image chipset, the 1x8 Splitter supports a cascade of up to 6 UltraAV Splitters for a massive display array. To create a 2 layer cascade, two same distribution amplifiers must be used. Run an HDMI cable from an output on unit #1 to the input of unit #2. A 2 layer cascade of the UltraAV 1x8 HDMI Splitter will support up to 15 outputs.
The circuit boards are equipped with both over-current and over-voltage protection and will automatically power down if encountered. The circuit boards will restore automatically once the excessive current or voltage has passed.
The 1x8 HDMI Splitter includes an infrared (IR) port that accepts an optional infrared transmitter (IR-TX) for controlling a source device using its remote control. When used with an optional IR adapter and an IR receiver (IR-RX), the source device can be managed by a remote control from the location of the display.
The below accessories can be purchased separately.
WARNING: This product may expose chemical such as Bisphenol A (BPA) that is known to the State of California to cause cancer or reproductive harm. For more information, please go to www.p65warnings.ca.gov