Infrared Transmitter (IR TX)

SKU: B164B-003B
$ 12.99

Out of stock. Please visit other retailers below or contact for inquiries.

Also available at these retailers:

Infrared Transmitter (IR TX) - For use with select Accell HDMI signal distribution products

The Infrared Transmitter (IR TX) passes a remote code by sending (flashing) a remote control command signal in the direction of a device's built-in IR Receiver. Supporting dual band frequencies, the IR Transmitter will communicate with the IR system of most every commonly used audio and video device.

Infrared Transmitter (IR TX)

The Accell Infrared transmitter (IR TX) is offered for use with specific Accell signal distribution systems or as a replacement to a damaged or lost IR transmitter in your IR over HDMI Adapter Kit.

Using an optional IR Adapter (B164B-004B) and an optional IR Receiver (B164B-002B) on the display (TV) side of your HDMI cable, transmit an IR signal from the location of your display, through the displays HDMI cable and into an Accell HDMI distribution system. From the distribution system, the IR signal passes through the IR Transmitter, sending the IR remote command in the direction of the infrared receiver of the source device. Now you can control a video source from a remote location by sending its remote control IR signal over your HDTV's existing HDMI cable.

Plug an optional IR Adapter into the display end of your existing HDMI cable. Plug an optional IR Receiver cable into the 3.5mm jack found on the IR Adapter. From your Accell distribution system, run the optional IR Transmitter from the IR port and point it at the IR eye of your source device. This IR Transmitter is dual-band compatible supporting IR signals from both IR bands (33KHz-60KHz).

IR Control with your Accell HDMI Splitter or Matrix

Uses your existing HDMI cable, an optional IR transmitter or IR receiver and your Accell signal distribution system to carry the IR signal over the length of the HDMI cable providing control of your audio or video source using the device's remote.

Use the adapter with your Accell HDMI distribution system to control a video source from a remote location by sending its remote control IR signal over your HDTV's existing HDMI cable. This adapter works with an Accell distribution system or as a replacement adapter in an IR Adapter Kit.

  • 33kHz to 60kHz dual band emitter covers all common IR frequencies
  • Includes double sided tape for mounting into place

Included with IR Transmitter

  • IR Transmitter - 56" long cable - 3.5mm plug
  • Double sided tape

For use with these Accell HDMI Distribution Systems

1x4 HDMI Splitter K078C-006B
1x8 HDMI Splitter K078C-007B
2x4 HDMI Matrix K072C-011B
4x2 HDMI Matrix K072C-012B
4x4 HDMI Matrix K072C-013B
1x4 HDMI HDBaseT Matrix K078C-008B
4x4 HDMI HDBaseT Matrix K072C-014B

Warranty: 2-Year Replacement

Warning using this product may be harmful under California 65WARNING: This product may expose chemical such as Bisphenol A (BPA) that is known to the State of California to cause cancer or reproductive harm. For more information, please go to


Just added to your cart:
Excl. postage 
My Cart
Just added to your wishlist:
Excl. postage 
My Wishlist