AxFAST® 16Amp Level 2 Portable Electric Vehicle Charger (EVSE)

SKU: P-120240V.USA-001
$ 399.99

Also available at these retailers:

AxFAST EVSE Charger

Accell conducted extensive consumer market research and designed and built a state of the art, easy to use, cost-effective EVSE charger solution for you. Simply plug in our AxFAST portable EVSE to charge your electric vehicle. We have supplied the power adapters for typical grounded outlets found in an American household. The charging gun supports the SAE J1772 standard for USA electric vehicles and is built with premium material, allowing for ultra-toughness and waterproof rating of IP55.

 

SAE J1772 Charging Coupler

Our EVSE charges at a range from 90V to 135V for Level 1 and 190V to 250V for Level 2, compatible with all electric vehicles that meet SAE J1772 standards including Tesla Model 3/S/X/Y, Chevrolet Volt/Bolt, Hyundai Ioniq/Kona, Volkswagen ID.4, e-Golf, Kia Soul/Niro, Honda Clarity, Audi E-Tron, BMW i3/i8, Fiat, Nissan Leaf, Toyota Prius, Smart Car/Fortwo, Ford Focus EV and more.

The EV charger is UL Certified SAE J1772 Charging Coupler

For Tesla owners: Tesla requires an additional adapter for converting to SAE J1772 (not included).

  

Level 2 Charging up to 3X Faster

When plugged into a properly installed 240V outlet, Level 2 (3.84kW at 16A/240V) charging rate is faster than Level 1 (1.44kW at 12A/120V).

The level 2 charging is 3X Faster when plugged into a properly installed 240V outlet

 

Can be used with any Power Source

The AxFAST 16A EVSE can be used with a standard grounded NEMA 5-15 (120V) or a NEMA 6-20 (240V) outlet. If you prefer to utilize the dryer outlet, the NEMA 10-30 (240V) adapter is available for purchase here.

Please note: Level 2 charging requires a properly installed grounded outlet. Consult your electrician first to see if your household meets the requirement. See additional information below under “Before You Buy”.

Our EVSE charges at a range from 90V to 135V for Level 1 and 190V to 250V for Level 2. It is compatible with all electric vehicles that meet SAE J1772 standards.

 

Indoor/Outdoor Installation

You have the option of permanently installing the unit on a flat wall or removing it for portability. If permanent installation is preferred, place the unit on a flat wall surface and using the screws and drywall anchors, attach the mounting bracket securely to the wall.  The AxFAST EVSE unit is rated IP55 for outdoor use. The unit features a 24.6 ft cable to reach your vehicle with ease.

Owner has the option of installing the unit on a flat wall or removing it for portability

 

Portable

Utilize the included carry case to take and use the EVSE anywhere plugs may be available.

The included carry case allows to easy portability for EVSE to be used anywhere plugs may be available.

 

USA Design and Support

The AxFAST 16A EVSE was designed by our customer-centric engineers who focus on simple solutions to solve everyday problems. This team is based in the heart of Silicon Valley in Fremont, CA.

Our technical support team is based in Fremont, CA., and can be reached at support@accellww.com.

 


Package Content

1 AxFAST EVSE charger

1 female NEMA 6-20 to male NEMA 5-15 adapter

1 carry case

1 user manual

4 screws and drywall anchors

The package comes with 1 carry case, 1 user manual, 4 screws and drywall anchors, 1 female NEMA 6-20 to male NEMA 5-15 adapter along with the charger itself.


Support 

For questions and concerns regarding this product, please visit our support page



Warranty: 1-year limited

Datasheet: Link

User Manual: Link


Warning using this product may be harmful under California 65WARNING: This product may expose chemical such as Bisphenol A (BPA) that is known to the State of California to cause cancer or reproductive harm. For more information, please go to www.p65warnings.ca.gov

Search

Just added to your cart:
Qty:
Total:
Subtotal:
Excl. postage 
My Cart
Just added to your wishlist:
Excl. postage 
My Wishlist